Denon AVR-4810CI Owner's Manual

Also see for AVR4810CI - 9.3 Channel Multi-Zone Home Theater Receiver: Specification Capabilites and Compatibilities Getting Started Connections Specifications Supplementary guide

Contents

0Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsPlaybackGQuick Select DefaultsHInput Source VolumeQuick Select 1 DVD –40dBQuick Select 2 SAT/CBL –40dBQuick Select 3 VCR –40dBCalling the Settings OutNaming Quick Select settingsSee “Quick Select Name” (vpage 55).nNOTEInput sources stored with the quick select function cannot be selectedif they have been deleted at “Source Delete” (vpage 53). In thiscase, store them again.The Quick Select function can be set separately for the different zones(vpage 101 “Quick Select Function”).Press QUICK SELECT at which the settings you want tocall out are saved.The “ ”, “ ” or “ ” indicator lights on the display.All of the settings in step 1 can be memorized together. By memorizingfrequently used settings, you can quickly access and enjoy a playbackenvironment that is consistently the same.Saving the Settings1 Set the items below to the settings you want to save.q Input Source (vpage 31)w Volume Level (vpage 85)e Surround Mode (vpage 87)r Audyssey Setting(MultEQ® XT, Dynamic EQ™, Dynamic Volume™) (vpage92, 93)t Video Select (vpage 60)2 Press and hold the desired QUICK SELECT until“Memory” appears on the display.The current settings will be memorized.Saving Frequently Used Settings(Quick Select Function)To Cancel the Party Moden“Rhapsody”, “Napster” and “USB” are not available in the PartyMode.There can only be one organizer in the network. To form a new partymode, first cancel the current party mode.Participating in the Party Mode as an AttendeeWhen the organizer starts the party mode, up to four attendees areselected automatically. No operation is required.When a device becomes an attendee, “ ” appears on thedisplay. The input source automatically switches to “NET/USB” andthe same network audio as on the organizer is played.If there are fewer than four attendees, a device can join the partymode after it has started. To participate in the party mode, performthe operation described below.•••1 Press [PARTY].“Enter Party Mode?” is displayed.An error message is displayed when you are not connected to anetwork.b2 Press o p to select “Yes”, then press ENTER.1 While in the party mode, press [PARTY].“Exit Party Mode?” is displayed on the GUI screen.2 Press o p to select “Yes”, then press ENTER.In this case, the other devices remain in the party mode.The same network audio (Internet Radio, Media Server or iPodDIRECT) can be played on multiple DENON products equipped withthe Party Mode function and connected in a network.The party mode consists of one organizer and up to four attendees.When one unit starts the party mode as the organizer, up to fourdevices on which the party mode function is activated automaticallyparticipate in the party as attendees. “Party Mode Function” (vpage50) must be set to “ON” ahead of time in order to use the party modefunction.To Cancel the Party ModenStarting the Party Mode as the Organizer1 Press [PARTY] to become the organizer.“Enter Party Mode?” is displayed.An error message is displayed when you are not connected to anetwork.b2 Press o p to select “Yes”, then press ENTER.The “ ” indicator on the display lights. The input sourceautomatically switches to “NET/USB” and the attendees areautomatically selected.3 Play the desired track.1 While in the party mode, press [PARTY].“Exit Party Mode?” is displayed on the GUI screen.2 Press o p to select “Yes”, then press ENTER.“Power off Attendees component?” is displayed.3 Press o p to select “Yes” or “No”, then pressENTER.Yes : The power of the attendees is turned off and the partymode is canceled.No : The party mode is canceled without turning off thepower of the attendees.Playing the Same Network Audioon Different Devices Connected in aNetwork (Party Mode Function)Convenient Functions