Denon AVR-4810CI Owner's Manual

Also see for AVR4810CI - 9.3 Channel Multi-Zone Home Theater Receiver: Specification Capabilites and Compatibilities Getting Started Connections Specifications Supplementary guide

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnectionsExternal ControllerRS-232C connectorWhen you connect an external control device, you can controlthe AVR-4810CI with the external control device. Performthe operation below beforehand.q Turn on the AVR-4810CI’s power.w Turn off the AVR-4810CI’s power from the externalcontroller.e Check that the AVR-4810CI is in the standby mode.nWhen using the AVR-4810CI in combination with the DENONRF remote controller (RC-7000CI, sold separately) or RF remotereceiver (RC-7001RCI, sold separately), two-way communication isenabled. The AVR-4810CI’s status information as well as iPod andInternet audio music files can be browsed watching the RF RemoteController’s display. For details, refer to the operating instructions ofthe respective devices.Set this to use the RS-232C connector for the DENON RF remotecontroller.“232C Port” (vpage 56)Set as NecessaryNOTEOn the GUI menu, when setting “232C Port” to “2Way Remote”, youcannot use the RS-232C connector as an external controller (vpage56).Connecting DevicesREMOTE CONTROL jacksn"69065When connecting a 2nd device, connect to the TRIGGER OUT 2terminal in the same way as the TRIGGER OUT 1 terminal.TRIGGER OUT jacksThe TRIGGER OUT output terminal outputs a maximum 12V/150 mA electrical signal. When a device with TRIGGER INterminal is connected via a monaural mini-plug, the connecteddevice’s power on/standby can be controlled through linkedoperation to the AVR-4810CI.nSet to change the conditions for linked operation via the TRIGGEROUT 1 or TRIGGER OUT 2 terminal.“Trigger Out1” or “Trigger Out2” (vpage 55)Set as NecessaryExtension jack for future use.(Connect devices correspondingwith room to room function tothis jack.)InfraredretransmitterInput OutputInfraredsensorWhen you connect the AVR-4810CI to a home network, you can enjoylistening to music files stored on your PC, internet radio audio andother sources. You can also control the AVR-4810CI from your PC viathe Web browser.InternetModem ComputerRouterFor connections to the Internet, contact an ISP (InternetService Provider) or a computer shop.To WAN sideLAN port/EthernetconnectorTo LAN portTo LAN port[Wired LAN]Connecting to a Home Network (LAN)