Denon AVR-4810CI Owner's Manual

Also see for AVR4810CI - 9.3 Channel Multi-Zone Home Theater Receiver: Specification Capabilites and Compatibilities Getting Started Connections Specifications Supplementary guide

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnectionsSpeaker ConnectionsThe AVR-4810CI can be connected to a maximum of three subwoofers.The same signal is output from each subwoofer terminal.w q w q w q w q */w q(R) (L) (R)*/ */(L)C A BSubwoofer(1st unit)CenterspeakerFrontspeakersSurroundspeakersSubwooferwith built-inamplifierFor the A B C speaker terminals, the output channels are different depending on the “Amp Assign” setting. Set“Amp Assign” to suit the speaker system being used and connect the speakers referring to the following chart.(2nd unit) (3rd unit)A : S.BACK/F.HEIGHT/F.WIDE and F.HEIGHT/F.WIDE speaker terminalsUse when connecting surround back speakers, front height speakersor front wide spekars.Speaker connectionsw q w q(L) (R)w q w q(L) (R)Surround back speakers,Front height speakersor Front wide speakersFront height speakers orFront wide speakersRelationship between “Amp Assign” settings and channelsoutput by each speaker terminal“Amp Assign”setting(vpage 39 ~ 41)Channels output by each speakerterminalConfig. ExtraChannelS.BACK/F.HEIGHT/F.WIDEF.HEIGHT/F.WIDE11.1ch(b) SB/FH/FW S.BACK F.HEIGHT9.1ch SB/FW S.BACK F.WIDESB/FH S.BACK F.HEIGHTFH/FW F.HEIGHT F.WIDE7.1ch SB S.BACK –FH F.HEIGHT –FW F.WIDE –5.1ch – – –b : Use the PRE OUT terminal for the front wide channel output.nn