Denon AVR-4810CI Owner's Manual

Also see for AVR4810CI - 9.3 Channel Multi-Zone Home Theater Receiver: Specification Capabilites and Compatibilities Getting Started Connections Specifications Supplementary guide

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsSettingsMaking Detailed Settings (Manual Setup)Main remote control unitoperation buttons:Displaying the menuCancel the menu:Moves the cursor(Up/Down/Left/Right) :Confirm the setting :Return to previous menuNotes concerning use of “Firmware Update” and “Add New Feature”In order to use these functions, you must have the correct system requirements and settings for abroadband Internet connection (vpage 26).Do not turn off the power until updating or upgrating is completed.Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/upgrading procedure to be completed.Once updating/upgrade starts, normal operations on the AVR-4810CI cannot be performed untilupdating/upgrading is completed.Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc., setfor the AVR-4810CI.The following backup data may be erased after an update or upgrade.• Internet radio preset channel• Internet radio Recently Played data• Care of data in Internet radio, media server and USB memory deviceIn the event of an update error during update or upgrade, turn the AVR-4810CI’s power off and then onagain. “Update retry” appears on the display and update restarts from the point at which update failed.If the error continues despite this, check the network environment.•••••Information regarding the “Firmware Update” function and “Add New Feature” will be announced onthe DENON web site each time related plans are defined.When usable new firmware is released with “Firmware Update” or “Add New Feature”, a notificationmessage is displayed on the GUI screen. When you do not want to be notified, set “Update Notification”(vpage 51) and “Upgrade Notification” (vpage 51) to “OFF”.••Setting contentsEnglish / FrançaisThe “Language” can also be set by the following procedure. However, the GUI screen is notdisplayed.1. Press and hold the main unit’s DSX and RETURN for at least 3 seconds.“Video Format” appears on the display.2. Use ui to set “GUI Language”.3. Press o p and set the language.4. Press the main unit’s ENTER, MENU or RETURN to complete the setting.Set the language for display on the GUI screen.Making Language Settings (Language)Default settings are underlined.Select input source and make playback settings.Items that can be set with the Source Select procedurenChanging the Input Terminal Assignments (Input Assign) vpage 58Making the Video Settings (Video) vpage 60Changing the Input Mode and Decoding Mode (Input Mode) vpage 61Changing the Input Source’s Display Name (Rename) vpage 62Correcting the Input Source’s Playback Level (Source Level) vpage 62Displaying the Playback Screen for the Different Input Sources (Play) vpage 62Making the Settings to Play Still Pictures (Still Picture) vpage 63Automatically Presetting Radio Stations (Auto Preset) vpage 63Setting Preset Channels so that They are not Displayed When Tuning (Preset Skip)vpage 63Giving Names to Preset Stations (Preset Name) vpage 64iPod (vpage 62)NET/USB (vpage 62)Media Server, USB/iPod, Napster and Rhapsody (vpage 63)nnnSetting the Playback Mode (Playback Mode) vpage 62Check the XM Radio and SIRIUS Radio Reception Sensitivity (Antenna Aiming)vpage 64Setting SIRIUS Radio Reception Restrictions (Parental Lock) vpage 65Making the Input Settings(Source Select)For details on how to select, set and cancel settings for each menu, see “GUI MenuOperation” (vpage 26).