Denon AVR-4810CI Owner's Manual

Also see for AVR4810CI - 9.3 Channel Multi-Zone Home Theater Receiver: Specification Capabilites and Compatibilities Getting Started Connections Specifications Supplementary guide

Contents

Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting SpecificationsConnectionsConnecting DevicesRLRL"6%*0"6%*03-065$0"9*"-065CD player(/%"6%*0065RLTurntable(MM cartridge)Record PlayerCD PlayerSelect the terminal to use and connect the device.The AVR-4810CI is compatible with record players with an MMcartridge. When you connect to a record player with an MCcartridge, use a commercially available MC head amp or a step-uptransformer.When you increase the volume without connecting the record player,there may be “booming” noise from the speakers.••NOTEThe SIGNAL GND terminal of the AVR-4810CI is not a safety groundconnection. Connect it to reduce noise when noise is excessive.Note that depending on the record player, connecting the ground linemay have the reverse effect of increasing noise. In this case, it is notnecessary to connect the ground line.Set this to change the input signal to which the input source isassigned.“Input Assign” (vpage 58)Set as NecessaryR LR L"4%3Control dock for iPodSet other than when iPod is assigned to the VCR (iPod) terminal.“Input Assign” – “iPod dock“ (vpage 60)Set as NecessaryControl Dock for iPodUse a DENON control dock for iPod (ASD-1R or ASD-11R, soldseparately) to connect the iPod to the AVR-4810CI. For instructions onthe control dock for iPod settings, refer to the control dock for iPod’soperating instructions.With the default settings, the iPod can be used connected to theVCR (iPod) connector.You can also connect the iPod you are using directly to the USB portof the AVR-4810CI (vpage 24 “USB Port”).••