Denon AVR-887 Operating Instructions Manual

Also see for AVR-887: Service manual Specifications Dimensions Specifications

Contents

Denon AVR-887 Operating Instructions Manual Manual pdf 13 page image

Easy Setup Procedure Easy Setup ProcedureENGLISHENGLISH10Auto Setup/Room Equalizer (Room EQ)Functions• The AVR-887’s auto setup and room equalizer functions use theattached microphone to measure the acoustic properties in theroom and automatically make the optimum settings.• When the auto setup procedure is performed, one of the followingthree correction curves can be selected for the room equalizerfunction.Normal:Adjust the frequency response of all speaker suitable for generalsurround system.Front:This adjusts the characteristics of each speaker to thecharacteristics of the front speakers.Flat:This the frequency response of all speakers flat. This mode isoptimum for playing multi-channel signal music.• To make the sound field settings manually ( page 60 ~ 63).About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unit[ON/SOURCE]ENTERD H F G[MODE SELECTOR 1]SYSTEM SETUPD H F GENTER SYSTEM SETUP F G, ENTERD Hq Connecting a microphoneConnect the attached setup microphone to MIC>.Sound receptor1Mount the setup microphone on a camera tripod, etc.,and set with the receptor pointing towards the ceiling.MicrophonePlace the setup microphone’s sound receptor at the height of theears in the listening position.It is not possible to measure properly if there are any obstaclesbetween the speakers and microphone. Check that there are noobstacles.2NOTE:• Once the settings are completed, disconnect the setup microphone.