40ENGLISHENGLISHAdvanced OperationThe night mode can be set when playing Dolby Digital sources. Thedialogues are easier to hear at night and when listening with thevolume low.Press [NIGHT].Night mode• Canceling night mode:Press [NIGHT] again.• When the night mode is set to “ON”, the “D.COMP” surroundparameter can not be selected.User mode functionThe AVR-887 is equipped with a function for storing the selected inputsource, the auto surround mode and input mode in the memory andselecting these settings when you want to use them.The following are stored in the memory:qq Currently set input sourceww Currently set surround modeee Currently set input modePress until “Memory” is displayed.12Press VIDEO SELECT until the desired image appears onthe monitor.Combining the currently playing sound with thedesired image (VIDEO SELECT function)• To cancel, press VIDEO SELECT to select “SOURCE”.• The video source selected with the video select function is stored inthe memory for the different input sources.• It is not possible to select HDMI input signals.• When playing HDMI video input signals, the analog video signal ofanother function cannot be selected for the HDMI video output.The surround mode last selected and the input mode setting are storedindividually for the different input sources.The surround parameters, tone control settings and playback levelbalance for the different output channels are memorized for eachsurround mode.Personal memory plus functionStoring the settings in the memoryPress at which the settings you want tocall out are stored.Calling the settings outNOTE:• DENON will accept no responsibility whatsoever for loss or damageof data on an iPod occurring when the iPod is used connected tothe AVR-887.• Some of the functions may not operate, depending on the typeof iPod and the software version.• The optional standard Control Dock for iPod is DENON ASD-1R soldseparately.If the screens above are not displayed, the iPod may not be properlyconnected. Check the connections and settings.Connect the AVR-887 and iPod using the ControlDock for iPod (ASD-1R) ( page 21).1Use FUNCTION to select the function assigned in step 2.3Assign the input terminal at “Setting the iPodAssignment” ( page 50).2Playing the iPod®iPod is a trademark of Apple Computer, Inc., registeredin the U.S. and other countries.With the iPod, non-copyrighted contents and contents that may belegally reproduced or played may be reproduced and played byindividuals for their personal use. Violating copyrights is prohibitedby law.The music recorded on the iPod can be played when using a ControlDock for iPod (ASD-1R, sold separately). The iPod can be controlledusing the buttons on the main unit and the remote control unit.(iPod screen)