Denon AVR-887 Operating Instructions Manual

Also see for AVR-887: Service manual Specifications Dimensions Specifications

Contents

Denon AVR-887 Operating Instructions Manual Manual pdf 75 page image

ENGLISHENGLISHAdditional Information72Neural SurroundNeural Surround™, a breakthrough in audio technology, will bring theexcitement of surround music to more of America’s listeningaudience. It provides the rich envelopment and discrete image detailof surround sound in a format 100 % compatible with stereo. Withsuperior spectral resolution and channel separation, NeuralSurround™ draws the brain’s attention to sonic details in musicalinstruments, vocals, and ambience that are typically masked by otherplayback systems. This allows the listener to fully experience therichness and subtleties in recorded performance as never before. Asthe chosen format for XM Satellite Radio’s new XM HD surroundprogramming, Neural Surround will help deliver more surround musicto more listeners than any other broadcast format. XM Satellite Radiowill be the first radio company -to broadcast surround sound on theradio 24 hours a day and will offer three channels fully dedicated toNeural Surround™ music. This alone will amount to more than 25,000hours of Neural Surround™ music each year.• This product is manufactured under license from Neural AudioCorporation.D&M Holdings Inc. hereby grants the user a non-exclusive, non-transferable, limited license right exercisable to use the NASURROUND Technology and other US and World Wide PatentsPending technology.“Neural” and “Neural Audio” and “Neural Surround” Aretrademarks of Neural Audio Corporation. All Rights Reserved.HDMI (High-Definition Multimedia Interface)HDMI is a digital interface standard for next generation TVs based onDVI (Digital Visual Interface) standards and optimized for use inconsumer equipment.Non-compressed digital video and multi-channel audio signals aretransmitted with a single connection.HDMI is also compatible with HDCP (High-bandwidth Digital ContentsProtection), a technology for protecting copyrights that encryptsdigital video signals in the same was as with DVI.• “HDMI”, “ ” and “High-Definition Multimedia Interface”are trademarks or registered trademarks of HDMI Licensing LLC.Cause PageMeasuresSymptom24TroubleshootingIf a problem should arise, first check the following.1. Are the connections correct?2. Have you operated the receiver according to the Operating Instructions?3. Are the speakers and other components operating properly?If this unit is not operating properly, check the items listed in the table below. Should the problem persist,there may be a malfunction. Disconnect the power immediately and contact your store of purchase.Display not lit and soundnot produced whenPOWER switch set toon.• Power supply cord not plugged insecurely.• Check the insertion of the powersupply cord plug.Display lit but sound notproduced.• Speaker cables not securelyconnected.• FUNCTION knob position is notappropriate.• Volume control set to minimum.• MUTING is on.• No digital signal is being input.• Connect securely.• Switch to the proper position.• Turn volume up to suitable level.• Switch off MUTING.• Properly select a digital signal inputsource.825252649Nothing is displayed onmonitor.• AVR-887’s video output terminals andmonitor’s input terminals are notproperly connected.• Monitor’s input setting is wrong.• The PURE DIRECT mode is set.• Player connected with componentterminal, TV connected with videoterminal (yellow) or S-Video terminal.• Check that the connections arecorrect.• Set the monitor’s input selector tothe terminals to which video signalsare connected.• Set a surround mode other than thePURE DIRECT mode.• Down-conversion is not possible forprogressive video signals.Make the interlace settings on theplayer.9,14 ~ 24—27—No DTS sound isproduced.• DVD player’s audio output setting isnot set to bit stream.• DVD player is not DTS-compatible.• AVR-887’s input setting is set toanalog.• Make the DVD player’s defaultsettings.• Use a DTS-compatible player.• Set to “AUTO” or “DTS”.——25Copying from DVD toVCR is not possible.• Copying between a source such asDVD and a VCR is not usuallypossible, as DVDs are often encodedwith copy-protection signals thatprevent VCR recording.• Copying is not possible. —