Denon AVR-887 Operating Instructions Manual

Also see for AVR-887: Service manual Specifications Dimensions Specifications

Contents

Denon AVR-887 Operating Instructions Manual Manual pdf 60 page image

Advanced Setup – Part 1 Advanced Setup – Part 157ENGLISHENGLISHSetting the Manual Equalizer SetupAdjust the tone of the various speakers while listening to the playbacksignals.Press DD HH to select “Manual EQ Setup”, then pressENTER.Press FF GG to set, then press ENTER.All CH:All channels can be adjusted simultaneously.L/R CH:The left and right channels of the pair of speakers can be adjustedsimultaneously.Each CH:The channels can be adjusted separately.Press FF GG to select the speaker.The display changes as follows.e Select “All CH”In this case, speaker selection is not performed.q Select “L/R CH”w Select “Each CH”FL/FRSBL/SBRCSL/SRFLSBRFR CSBL SR SLSBPress DD HH to select the frequency, then press FF GG toadjust.The level of the various frequencies can be adjusted between–6.0 dB and +6.0 dB.1234Press ENTER.5(2 speakers)(1 speaker)1 23Setting the Auto Surround ModeSet whether or not to store the surround mode last played for theinput signal.The surround mode used at last for the four types of input signalsshown below is stored in the memory, and the signal is automaticallyplayed with that surround mode the next time it is input.q Analog and PCM 2-channel signals (STEREO)w 2-channel signals of Dolby Digital, DTS or other multi-channelformat (DOLBY PLIIx Cinema)e Multi-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY/DTS SURROUND)r PCM multi-channel signals other than Dolby Digital and DTS(MULTI CH IN)Default settings are indicated in ( ).During playback in the PURE DIRECT mode, the surroundmode does not change even if the input signal is changed.Press DD HH to select “Auto Surround Mode”, thenpress ENTER.Press FF GG to set.Press ENTER.12312