Denon AVR-887 Operating Instructions Manual

Also see for AVR-887: Service manual Specifications Dimensions Specifications

Contents

Denon AVR-887 Operating Instructions Manual Manual pdf 63 page image

ENGLISHENGLISH60Advanced Setup – Part 2• If the “Auto Setup” procedure has already been performed, there isno need to make this setting.• Perform this setting if you wish to make the settings for yourspeaker systems manually.Speaker SetupSetting the Speaker ConfigurationAutomatically set the output component and properties for thevarious channels according to the combination of speakers to beactually used for surround playback.About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitENTERD H F G[TEST TONE]D H F GENTERD HF G, ENTERPress DD HH to select “Speaker Setup”, then pressENTER.Press DD HH to select “Speaker Config.”, then pressENTER.Press DD HH to select the speaker, then press FF GG to set.Large:Select this when using large speakers with ample low frequencyreproduction capabilities.Small:Select this when using small speakers without ample low frequencyreproduction capabilities.Yes / No:Select “Yes” when a subwoofer is connected, “No” when nosubwoofer is connected.None:Select this when no speaker is connected.2spkrs / 1spkr:Select the number of surround back speakers.123Press ENTER.A subwoofer with sufficient low frequency playback capability canbetter handle deep bass than most main and surround speakers,and the system’s overall performance will be greatly enhancedwhen “Small” is set for the main (front) and surround speakers.When “Front” is set to “Small”, “Subwoofer” is automatically setto “Yes”, and when “Subwoofer” is set to “No”, “Front” isautomatically set to “Large”.4• Select “Large” or “Small” not according to the actual size of the speakerbut according to the speaker’s capacity for playing low frequency(bass sound below the frequency set for the Crossover Frequency)signals. If you do not know, try comparing the sound at both settings(setting the volume to a level low enough so as not to damage thespeakers) to determine the proper setting.123Center speakerFront speakerSubwooferSurround speakerSurround back speakerhh