Basic OperationBasic Operation35ENGLISHENGLISH• Select “Default Yes” and pressFFto reset all the settings.PressDD HHto select the item, then pressFF GGto set.Selecting the DSP surround simulationPress[DSP SIMULATION].5CH/7CH STEREOJAZZ CLUBMONO MOVIEMATRIXVIDEO GAMEROCK ARENAVIRTUAL13¢To operate the surround mode and the surroundparameters from the remote control unit¢Operating the surround mode and the surroundparameters from the main unit’s panelUseto select the surround mode.DIRECTSTEREOMONO MOVIEDTS NEO:65CH/7CH STEREONEURAL SURROUNDMATRIXVIRTUAL SURROUNDDOLBY PRO LOGICIIxROCK ARENAJAZZ CLUBVIDEO GAME1Toselectthesurroundmodewhileadjustingthesurroundparameters, tone defeat or tone control, press,then operate the selector.Perform steps 2 to 4 under “Selecting the DSP surroundsimulation”.2About the button names in this explanation<>: Buttons on the main unit[]: Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unit[CH SELECT],ENTERDHFGDHFG[DSP SIMULATION]ENTERSURROUNDPARAMETER,SURROUND PARAMETERD HF G, SELECT/ENTERPressENTERorSURROUND PARAMETER.4ROOM SIZE:Adjust the imaginary size of the recreated sound field space. (Doesnot express size of room in which played.)There are five parameters: “small”, “med.s”, “medium”, “med.l”and “large”.SB CH OUT•ON:Surround back channel played.•OFF:Surround back channel not played.EFFECT LEVEL:Adjust the strength of the surround effect.DELAY TIME:(MATRIX mode only)Adjust the delay time between “0 ms” and “110 ms”.PressSURROUND PARAMETER.22