o Bluetooth cannot be played backSymptom Cause / Solution PageBluetooth devices cannotbe connected to this unit.0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of theBluetooth device to enable the Bluetooth function.－0 Bring the Bluetooth device near to this unit. －0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile. －0 Turn the power of the Bluetooth device off and on again, and then try again. －0 Set “Network Control” to “On” and connect again. 91NFC connection fails 0 Check the NFC settings on each Bluetooth device. －0 Cancel the Lock function on each Bluetooth device. －0 Check the NFC position on each Bluetooth device, and then move the NFC close to Q on this unit. 620 Set “Network Control” to “On” and connect again. 91The sound is cut off. 0 Bring the Bluetooth device near to this unit. －0 Remove obstructions between the Bluetooth device and this unit. －0 To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LANdevices and other Bluetooth devices.－0 Reconnect the Bluetooth device. －o File names on the iPod/USB memory device are not displayed properlySymptom Cause / Solution PageThe file names are notdisplayed properly (“…”,etc.).0 Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters thatcannot be displayed are replaced with a “.” (period).－Contents Connections Playback Settings Tips Appendix109Front/Toppanel Rear panel Remote control unit Index
