Pairing with a Bluetooth deviceIn order to enjoy music from a Bluetooth device on this unit, the Bluetoothdevice must first be paired with this unit.Once the Bluetooth device has been paired, it does not need to be pairedagain.1 Press Bluetooth to switch the input source to“Bluetooth”.When using for the first time, the unit will go into the pairing modeautomatically and “Pairing Mode” will appear on the display of theunit.2 Select this unit when its name appears in the list ofdevices displayed on the screen of the Bluetoothdevice.At the end of the pairing, the device name appears on the display ofthis unit.0 Connect to the Bluetooth device while “Pairing Mode” is beingdisplayed on the display of the unit.Perform the connection with the Bluetooth device close to the unit(about 1 m).0 When connecting a second Bluetooth device, either press and hold Bluetooth onthe remote control unit or SOURCE on this unit for approximately 3 seconds, orpress SEARCH when the input source is set to “Bluetooth” in order to pair with theBluetooth device.0 This unit can be paired with a maximum of 8 Bluetooth devices. When a 9thBluetooth device is paired, it will be registered in place of the oldest registereddevice.0 When a number appears on the display of this unit, check that it is the samenumber as that shown on the screen of the Bluetooth device and then select “pair”for both the Bluetooth device and the unit. (To select “pair” on this unit, pressENTER on the unit.)0 Enter “0000” when the password is requested on the screen of the Bluetoothdevice.Contents Connections Playback Settings Tips Appendix59Front/Toppanel Rear panel Remote control unit Index
