TipsSimple operations in the power off state0 When a input source select buttons, 1/3 button, FAVORITES CALL button or 5 button is pressed, the operation is performed at the same time as theunit switches on. (v p. 31, 33, 50)0 When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, Denon “Hi-Fi Remote” app. (v p. 91)Simple operations for iPod/USB0 When connected to the USB port, the Input Source automatically changes and playback begins. (v p. 53, 56)I only want to recharge my iPod0 Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. (v p. 55)Specifying the iPod track with the alarm function0 Connect the iPod to this unit by USB and then press the MODE button to register your favorite tracks in the favorites using Browse iPodmode. (v p. 50) Then set a track registered in the favorites as the alarm. (v p. 86)0 When using alarm playback on an iPod touch or iPhone, set the iPod touch or iPhone to “Sleep” mode. If the power is switched off using the power offoperation, alarm playback cannot be used.Specifying the desired track with the alarm function0 After registering the desired track in NAS, etc., register the track in the favorites and then specify the track in the alarm settings. (v p. 86)Change to summer time0 Select “General” - “Clock” in the setup menu and configure the settings. (v p. 87)Contents Connections Playback Settings Tips Appendix99Front/Toppanel Rear panel Remote control unit Index
