Playing a Bluetooth deviceCheck the following before you play back music.0 The Bluetooth function of the Bluetooth device must be turned on0 Pairing must be completed1 Press Bluetooth to switch the input source to“Bluetooth”.The unit will automatically connect to the most recently usedBluetooth device.2 Start playing the Bluetooth device.0 The Bluetooth device can also be operated with the remotecontrol of this unit.Operation buttons Function1/3 Playback / Pause2 Stop8 9 Skip to previous track / Skip to next track6 7 (Press and hold) Fast-reverse / Fast-forward0 When the power of this unit is turned on, the input source will be automaticallyswitched to “Bluetooth” if a Bluetooth device is connected.0 When the “Network Control” setting of this unit is set to “On” and a Bluetoothdevice is connected with the unit in the standby state, the power of the unit will beturned on automatically.0 Press INFO on this unit during playback to switch the display between Title name,Artist name, Album name, etc.0 Incompatible characters are displayed as “.” (period).NOTE0 To operate the Bluetooth device with the remote control of this unit, the Bluetoothdevice needs to support the AVRCP profile.0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.0 Depending on the type of Bluetooth device, this unit outputs audio that is coupledto the volume setting on the Bluetooth device.Contents Connections Playback Settings Tips Appendix60Front/Toppanel Rear panel Remote control unit Index
