Denon DVD-2910 Operating Instructions Manual

Also see for DVD-2910: Operating instructions Specifications Supplementary guide Operating instructions Service manual

21ENGLISH3Remote control unit Remote control unitAUD I O SE TUPAUD I O CHANNE LDIGITAL OUTPUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :NORMALPCMAUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTPUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :ONOF FNOTES:• This function only works with DVD-videos and video CDsonly.• Note that for some discs the effect will be weak or therewill be no effect.• Turn off other surround functions (the TV’s surroundmode, etc.).✽ is a trademark of SRS Labs, Inc. TruSurroundtechnology is incorporated under license from SRS Labs,Inc.wWhen “DIGITAL OUTPUT” is selected:NORMAL (Factory default)When playing DVDs recorded in Dolby Digital or DTS,bitstream signals are output from the digital audio outputterminals. When playing DVDs recorded in linear PCM orpacked PCM, linear PCM signals are output.Select “NORMAL” when making digital connections toan AV amplifier with built-in Dolby Digital and DTSdecoder.PCMWhen playing Dolby Digital/DTS bitstream signals orDVDs recorded in linear PCM or packed PCM, the signalsare converted into 48 kHz/16-bit PCM (2-channel) signalsand output from the digital outputs. When playing DVDsrecorded in PCM, linear PCM signals are output.e When “LPCM (44.1 kHz/ 48 kHz)” is selected:OFF (Factory default)When playing linear PCM or packed PCM DVDs that arenot copyright-protected, for 2-channel PCM audio signalsup to 96 kHz, linear PCM signals are output as suchwithout being converted from the digital outputs. (176.2kHz and 192 kHz signals are converted to 88.2 kHz and96 kHz, respectively.)For DVDs containing multi-channel PCM signals, thedigital signals are down-mixed for output into twochannels, front left and right. (Only the front left and rightchannels are output for sources for which down-mixing isprohibited.)When playing copyright-protected linear PCM or packedPCM DVDs, in consideration of copyrights, no digitalsignals are output for sources exceeding 48 kHz/16 bits.When playing such sources, either set to “ON” or makeanalog connections. (See page 9.)ONLinear PCM and packed PCM signals are converted to44.1 kHz or 48 kHz and output. (The PCM digital audiooutput signals are converted to 48 kHz or less inconsideration of copyrights.) When making digitalconnections to an AV amplifier that is not compatiblewith 96 kHz/88.2 kHz signals, set to “ON”.3r When “SOURCE DIRECT ” is selected:OFF (Factory default)Please set to OFF when performing speaker settings orsetting the delay time and playing back.ONSet to ON when playing back without performing theprocessing of speaker settings. Performing this settingwill result in the setting of the DTS recommended all-channel, full bandwidth playback. (Note that the volumeof the sub woofer will increase by 5 dB, and there will bean increase of 15 dB with a Super Audio CD.) This is alsoset when playing back a 6-channel source of DVD audiothat has been recorded with all channels and fullbandwidth. When set to “OFF”, the speaker size will beset to “Large” for all speakers and the sub woofer willbe set to “Yes”. When playing back software such asthis, perform the analog connections according to thesoftware instruction manual.t When “BASS ENHANCER” is selected:OFF (Factory default)No sound is produced from the subwoofer.ONSound is produced from the subwoofer.In the case, set the subwoofer to “YES” at the speakersettings.✽ This works only with analog audio output.✽ This mode does not work at “SOURCE DIRECT” is on.y When “COMPRESSION” is selected:OFF (Factory default)Select this for the standard range.ONSelect this to achieve powerful sound even when thevolume is low. This setting is suited for watching DVDslate at night with the volume low.(This setting is onlyvalid for DVDs recorder in Dolby Digital.)u When “SACD (Super Audio CD) FILTER” is selected:50kHz (Factory default)When playing Super Audio CDs, high frequencies of50kHz and higher are cut.100kHzWhen playing Super Audio CDs, high frequencies of100kHz and higher are cut.✽ Set to 100kHz when a high frequency compatible AVamplifier is connected.Remote control unit Remote control unitAUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTPUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :ONOF FAUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTPUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :OF FON✽ To exit the setup modeUse the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quitby pressing the SETUP button on the remote control unit.AUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTPUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :ONOF FAUD I O SE TUPAUD I O CHANNE LD I G I TAL OUTPUTL PCM (4 4 .1 kHz / 4 8 kH z)BASS ENHANCERSACD F I L TERSOURCE D I RECTE X I T SE TUPCOMPRESS IONDEC I S I ON : ENTER BUT TONSE L ECT :100kHz50kHz