Denon DVD-3910 Operating Instructions Manual

Also see for DVD-3910: Supplementary guide Specifications Specification Operating instructions Service manual

17ENGLISHNOTES:• When DENON LINK is set, the down-mixed audio signals are output only from the left and right terminals and front left and frontright terminals.If you want to use the analog terminals, set to “DENON LINK” to “OFF”.• When using the DENON LINK connector, the “AUDIO CHANNEL”, “DIGITAL OUTPUT”, “LPCM (44.1kHz/48kHz)”, “SOURCEDIRECT” and “BASS ENHANCER” settings under “AUDIO SETUP” and the “HDMI AUDIO SETUP” and the “IEEE1394”settings under “DIGITAL INTERFACE SETUP” at “SETUP” cannot be made.The digital output cannot be turned off even by setting “PURE DIRECT SELECT” to “ALL OFF” or selecting a mode for whichthe digital output is set to off. (See pages 47, 48.)• The DVD-3910’s speaker settings are invalidated when the DENON LINK connector is connected.• When the DENON LINK 2nd connection, Super Audio CD’s signals are not output from the DENON LINK connector. Please usethe analog audio output terminals.The simple connection of one IEEE 1394 cable permits high quality digital transfer of the following between devices having IEEE 1394connectors: the audio of DVD video, DVD audio that up until now could only be connected by 5-conductor audio cable in an analogconnection, or Super Audio CD and other multi-channel audio. (unless DENON LINK connections)(IEEE 1394 is an international standard established by the Institute of Electrical and Electronics Engineers, Inc. of the U.S.)(8) IEEE 1394 connectionsSTEREOANALOG EXT. INDOLBYSURROUND DTSSURROUND WIDESCREENCINEMA /MUSIC 6.1 / 7.1SURROUND VIDEOON / OFFSTATUSM-ZONE 1FUNCTION CONTROL5CH / 7CHSTEREO DSPSIMULATIONTONEDEFEATMODESELECTREC /M-ZONE 2SURROUND MODEINPUT REC SELECT / M-ZONEMULTI FUNCTIONDVD-3910Front speaker (left)Surround speaker (left)Center speakerAV amplifier with IEEE 1394 terminalsFront speaker (right)SubwooferSurround speaker (right)To power outletIEEE 1394