26ENGLISH23In the stop mode, press the SETUP button.• The setup (default settings) screen appears.NOTE: For some menus, the initial values can be changedduring playback.LANGUAGE SETUPUse this to set the language to be used when playing thedisc. If the set language is not offered on that disc, the discsdefault language is set.And use this to set the language for the default setting screenand messages displayed on the TV screen (“PLAY”, etc.).DIGITAL INTERFACE SETUPUse this to set the output of DVI, HDMI, DENON LINK andIEEE1394 terminals.VIDEO SETUPUse this to set the DVD-3910’s screen mode. (TV aspect andTV type.)AUDIO SETUPUse this to set the DVD-3910’s audio output mode.(Digital and LPCM output settings.)RATINGSUse this to disable playback of adult DVDs so that childrencannot watch them. Note that playback of adult DVDs cannotbe disabled if the rating level is not recorded on the DVD.OTHER SETUPThese include special settings such as CAPTIONS, WALLPAPER , etc,.Use the 0 and 1 cursor buttons to select the desired settingitem, then press the ENTER button.Select “LANGUAGE SETUP”. (See page 29.)Select “DIGITAL INTERFACE SETUP”. (See page 32.)Select “VIDEO SETUP”. (See page 36.)Select “AUDIO SETUP”. (See page 38.)Select “RATINGS”. (See page 43.)Select “OTHER SETUP”. (See page 45.)L ANGUAGE SE TUPSE L ECT : DEC I S I ON : ENTER BUT TOND I AL OGD I SC MENUSOSD LANGUAGEE X I T SE TUPSUBT I TL EENGL I SHOFFENGL I SHENGL I SH8 CHANGING THE DEFAULT SETTINGSSELECTHDMI/DVIOPEN/SUPER AUDIOFORMATNTSC/PAL CLOSECD SETUPPROGRAM/DIRECTCLEARCALLSEARCH MODEAUDIOSUBTITLEANGLEPAGEMARKERRANDOMDIMMERZOOMPICUREADJUSTSETUPMEMORYA-BREPEATSELECTRC-972PURE DIRECTDISPLAYTOP MENURETURNMENUSKIPSLOW/SEARCHPLAYSTILL/PAUSESTOPBACK LIGHTPOWER OFFPOWER ON132SETUPRemote control unitRemote control unit✽ To exit the setup modeUse the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUPbutton on the remote control unit.1Turn on the power.• Press the power button, the power indicator lights greenand the power turns on.When pressed again, the power turns off and indicator isoff.• In the standby mode (the power indicator lights red), pressthe ON/STANDBY button on the main unit or POWER ONbutton on the RC-972.ON / STANDBYMain unit2 Make the initial settings to suit your usage conditions before starting playback.The initial settings are retained until they are next changed, even if the power is turned off.ON / STANDBYDENON LINK AL 24 PLUS11Remote control unit(Green)ON / STANDBYMain unit Remote control unitPOWER ON(Red)