Denon DVD-3910 Operating Instructions Manual

Also see for DVD-3910: Supplementary guide Specifications Specification Operating instructions Service manual

21ENGLISH5 PART NAMES AND FUNCTIONS(1) Front PanelSee page 3.q Power ON/STANDBY button• Press once to set to the standby mode. The indicatorlights up in red.• Press again to turn the power on. The indicator lights up ingreen.w Power indicator• This indicator lights when the power is on and when thepower is in the standby mode.Light green : Power is onLight red : Power is in the standby modee Power switch• Press once to turn the power on.• Press again to set to the “OFF” position and turn thepower off.r DENON LINK indicator• This indicator lights when the audio signals are transferredby DENON LINK connections.t AL24 PLUS indicator• This indicator lights when the audio signals of a DVD, etc.,are being processed digitally with the AL24 processingPlus.y Display• Information on the disc that is currently playing is shownon the display. (See page 22.)u Remote control sensori SELECT of HDMI/DVI button• Press this to set the video signal output from the HDMIconnector or the DVI connector. (See page 53.)o FORMAT of HDMI/DVI button• Press this to set the video signal format from the HDMIconnector or the DVI connector. (See page 53.)!0 VIDEO MODE button• Use this to instantly change the adjustment mode of thestored video signals.The unit will return to the stored setting values when thepower is switched off.(The setting values of this mode will not be stored.)• PICTURE MODE• PROGRE. MODE (PROGRESSIVE)• TV TYPE• SQUEEZE MODENo effective for interlaced image. (See page 37.)OFF ONNTSCMULTI PALAUTO1 AUTO2 VIDEO1 VIDEO2 VIDEO3STD M1 M2 M3 M4 M5480P/576P 720P 1080iHDMI Y Cb Cr HDMI RGBHDMI/DVI OFFDVI!1 Select the playback area/layer of SUPER AUDIOCD (SUPER AUDIO CD SETUP)• Switch the area /layer of the Super audio CDS played withpriory.• MULTI.......When playing Super audio CDs, the Multichannel area is played with priory• STEREO....When playing Super audio CDs, the stereochannel area is played with priority.• CD.............When playing Super audio CDs, the CDs layeris played with priority.!2 PURE DIRECT SELECT button• Press to switch the modes with the specific video signalsand digital audio signals and indicate in display on and off.(See pages 47, 48.)!3 DVD/AUDIO/VIDEO logo• This indicator lights when playing the DVD audio or DVDvideo.!4 Super Audio CD logo• This indicator lights when playing the Super audio CD.!5 Disc tray• Load discs here. (See page 25.)• Press the OPEN/CLOSE button !6 to open and close thedisc tray.• The disc tray is also closed when the PLAY button !8 ispressed.!6 OPEN/CLOSE button (5)• Press this to open and close the disc tray.(See pages 25, 56.)!7 STILL/PAUSE button (3)• Press this to pause images or music or to play imagesframe by frame. (See page 58.)!8 PLAY button (1)• Press this to play the disc. (See page 57.)!9 STOP button (2)• Press this to stop the disc. (See page 58.)@0 Skip button (8)• Press this to move back to the beginning of the currenttrack (or chapter). (See page 59.)• Press again to move back to the beginning to the previoustrack (or chapter).@1 Skip button (9)• Press this to move ahead to the beginning of the nexttrack (or chapter). (See page 59.)@2 Slow/Search buttons (6 7)• Press this to set the slow or search play mode.(See pages 58, 59.)6: search in the reverse direction.7: search in the forward direction.NORMAL MODE 1 MODE 2 ALL OFFMULTI STEREO CD