Denon RCD-CX1 Owner's Manual

Also see for RCD-CX1: Owner's manual Specifications Service manual

ENGLISHGetting Started Setup Playback Setting the Timer Other Functions Troubleshooting SpecificationsNOTE• Insert the AC plugs securely. Incomplete connections could cause noise.• When the power cord is plugged into the power outlet, the power indicator flashes orange for about 10 seconds.Do not unplug the power cord before the power indicator turns off and the RCD-CX1 enters Standby mode.• Only use the supplied power cord.• Be sure the power cord is unplugged from the power outlet before connecting or disconnecting it to the AC IN.Wait until all connections have been completed before connecting the power cord.To householdpower outlet(AC 230 V, 50 Hz)Power cord(supplied)Turning the Power On (vpage 14)NOTE• Make sure the AM loop antenna lead terminals do not touch metalparts of the panel.• Do not connect two FM antennas simultaneously.n Connecting the AM loop antenna1 Push the lever.2 Insert the conductor.3 Return the lever.ConnectionsAM / FMThe AM and FM reception sensitivity depends on the place the antennais set and the direction in which it is set. Set it so that reception isbest.Antenna terminalsAM loopantenna(supplied)FM indoor antenna(supplied)Connections to Other Devices Connecting the Power CordOnce Connections are Completed