Denon RCD-CX1 Owner's Manual

Also see for RCD-CX1: Owner's manual Specifications Service manual

Getting Started Connections Setup Setting the Timer Other Functions TroubleshootingENGLISH Specifications1 Press [PURE DIRECT/TONE] and select the mode youwant to adjust.BASSTREBLEPure D(PURE DIRECT)BALANCE2 Adjust the volume with [4/o, 6/p].b Thereafter, to adjust another mode, press [PURE DIRECT/TONE].b If no operation is performed for 3 seconds, the adjustment isretained and the normal display reappears.Adjusting the Tone[Selectable modes]Pure D(PUREDIRECT): This is the mode that recreates the original sound mostfaithfully, providing extremely high quality sound.[Selectable items] on offBASS : Adjusts the bass sound.[Variable range] –8dB ~ +8dBTREBLE : Adjusts the treble sound.[Variable range] –8dB ~ +8dBBALANCE : Adjusts the left/right volume balance.[Variable range] +L10 ~ CENTER ~ +R10Press [4/o] when you want to adjust the left channel,and [6/p] when you want to adjust the right channel.Settings made upon purchase:• Pure D (PURE DIRECT) ·············off• BASS ·······································0dB• TREBLE ···································0dB• BALANCE ························ CENTERWhen “Pure D” is set to “on”, digital output is switched off. What isshown on the display also goes off. (When not playing or when no discis loaded, only part of the display is shown.)NOTE• When “Pure D” is set to “on”, you cannot set “BASS”, “TREBLE” or“BALANCE”.• When “Pure D” is set to “on”, you cannot use [DIMMER].Switching the Brightness of the DisplayPress [DIMMER].100% 40%OFFb The display’s brightness switches each time the button ispressed.Turning the Sound Off Temporarily(Muting)Press [MUTE].The “Mute on” is displayed.To cancel, press [MUTE] again.(The mute mode is also canceled when the is turned or a[VOLUME df] is pressed.)PlaybackAdjusting the Master VolumeEither turn or press [VOLUME df].The volume level is displayed.[Variable range] –90.0dB ~ 0.0dBb When lowering the volume from –90.0 dB, the display shows“– –.– dB”.Input Source SwitchingPress SOURCE to select input source.CD TUNER PHONOLINE1 (iPod)LINE2 bb The “iPod” indicator is displayed when a Control Dock for iPod isconnected. (“NO iPod” is displayed if no iPod is connected to theControl Dock for iPod.)Listening with HeadphonesPlug the headphones (sold separately) into the .b The sound from the speakers is automatically cut off.NOTEBe careful not to set the volume too high when using headphones.Operations During Playback