Denon RCD-CX1 Owner's Manual

Also see for RCD-CX1: Owner's manual Specifications Service manual

Getting Started Connections Setup Setting the Timer Other Functions TroubleshootingENGLISH SpecificationsRecording1 Press to choose the input source to berecorded.2 Set the recorder to the recording mode.b For instructions on operating, see the operating instructions of theconnected component.3 Start playback on the player.b For instructions on operating, see the operating instructions of theconnected component.• The LINE2 input signal is not output to the recording output terminal(REC).• Adjusting the volume or tone does not affect the sound beingrecorded.Disconnecting the iPodTo Switch the DisplayDuring playback, press [TIME/DISPLAY].The display switches each time the button is pressed.Elapsed time ofcurrently playing trackAlbum title Artist nameTitle name1 Press ON/STANDBY to set the standby mode.2 Remove the iPod from the control dock for iPod.NOTE• DENON will accept no responsibility whatsoever for any loss of iPoddata.• Depending on the type of iPod and the software version, somefunctions may not operate.• If the function is set to something other than “iPod”, press [iPod1/3] to switch the function to “iPod” and start playback. (vpage27 “Auto Function Selector Function”)• The function can also be switched to “iPod” using or[LINE1/LINE2].n Stopping playback temporarilyDuring playback, press [iPod 1/3].Press again to resume playback.n Fast-forwarding or fast-reversingDuring playback, either press and hold [CH–/8] or [CH+/9].n To cue to the beginning of a trackDuring playback, press [CH–/8] or [CH+/9].n To perform Repeat/Random playback(Browse mode only)Press [REPEAT/RANDOM].n To switch between the Browse and Remote modesPress [MODE].Browse modeOperating mode that shows iPod information on the RCD-CX1display.In this mode, it is not possible to operate the iPod directly or toperform the operations associated with the slide show function. Setthe Remote mode to play slide shows.Remote modeThis mode is for operating the iPod directly while watching theinformation displayed on the iPod’s screen.Also see the control dock for iPod operating manual regardingconnection and operation.Recording on an External DeviceFirst connect the device from which you want to record to theRCD-CX1 (vpage 11).PlaybackListening to Audio1 Use [2/u, 8/i] to select the item, then press [5/ENTER]to select the music file to be played.2 Press [iPod 1/3].Playback starts.Single-track repeat All-track repeatOFF(indicatorturns off)RandomRandom Repeat Single-trackrandom repeat