Denon RCD-M38 Owner's Manual

Also see for RCD-M38: Owner's manual Manual Del Usuario Service manual Owner's manual User manual

ENGLISH9Getting Started Basic ConnectionsBasic Connections Advanced ConnectionsBasic Operations Advanced Operations TroubleshootingExplanation terms Specifi cations IndexConnecting recording componentsCD recorder / MD recorder / tape deckAudio cable (sold separately)Stereopin-plug cable RLRL(White)(Red)3- 3-*/ 065"6%*0"6%*0RLRLRLRLCD recorder /MD recorder /Tape deckConnecting an antennaAM/FM• Connect the FM antenna or AM loop antenna included with the unitto enjoy listening to radio broadcasts.• After connecting the antenna and receiving a broadcast signal(vpage 14 “Tuning in Broadcast Stations”), use tape to fix theantenna in a position where noise is the lowest.w eqAM loop antenna(Supplied)FM indoor antenna(Supplied)WhiteBlackNOTE• Do not connect two FM antennas simultaneously.• Even if an external AM antenna is used, do not disconnect the AMloop antenna.• Make sure the AM loop antenna lead terminals do not touch metalparts of the panel.• If you are unable to receive a good broadcast signal, we recommendinstalling an outdoor antenna. Inquire at the retail store where youpurchased the unit for details.DAB (for RCD-M38DAB only)n Connecting the DAB indoor antennaDAB station reception (vpage 17).DAB indoor antenna(Supplied)Using the AM loop antennan To use suspended ona wallSuspend directly on the wallwithout assembling.Nail, tack, etc.n To use standing aloneUse the procedure below toassemble.Assembling the AM loop antenna1 Put the stand sectionthrough the bottom ofthe loop antenna from therear and bend it forward. LoopantennaStandSquareholeProjectingpart2 Insert the projecting partinto the square hole in thestand.