Denon RCD-M38 Owner's Manual

Also see for RCD-M38: Owner's manual Manual Del Usuario Service manual Owner's manual User manual

ENGLISH20Advanced OperationsPreparationsBefore playing control dock for iPod1 Set the iPod on the DENON control dock foriPod.(vSee the control dock for iPod’s operating instructions.)2 Press ON/STANDBY.3 Press SOURCE to select “AUX1/Dock”.Before playing a USB or an iPod1 Press ON/STANDBY.2 Connect USB memory device or iPod connectioncable.When the USB memory device or iPod is connected to the USBport on this unit, the source automatically switches to “USB”and file playback begins.n Turning the power off (to the standby mode)Press ON/STANDBY again.NOTEBe sure to stop playback before turning the power off.MP3 or WMA playback order of MP3 orWMA fi lesWhen there are multiple folders containing MP3 or WMA files, theplayback order of folders is automatically set when this unit reads themedia. The files in each folder are played back in the order in whichthe files were recorded on the media, from the oldest date and time.n Playback order of foldersCD-R/CD-RWFor playback of files on CD-R or CD-RW , files in all folders on the firstlayer are played first, next on the second layer, then next on the thirdlayer, and so on in this order.USB memory deviceFor playback of files recorded on USB, files in the first folder on thefirst layer are played first, next folders on the second layer in the folder,then next on the third layer, and so on in this order. Then accordinglyfiles on another first layer are played.• The playback order displayed on a PC may differ from the actualplayback order.• The playback order with a CD-R/CD-RW may differ, depending onthe writing software.NOTEThe playback order may differ from the order in which the foldersor fi les were recorded if you delete or add a folder or file on USB.This occurs because of data recording specifications and is not amalfunction.Button located on both the main unit and the remote controlBUTTONButton only on the main unit