ENGLISH14Automatically presetting FM stations(Auto preset)This unit can be preset with a total of 99 DAB, FM and AM broadcaststations.• A maximum of 40 DAB broadcast stations can be preset.(For RCD-M38DAB only)NOTEAuto preset is not possible with AM broadcast stations.nAuto presetting with the remote controlPerform this operation when tuned to an FM or AM broadcaststation.1Press[MENU].2Use[ui]to select “TUNER SETUP”, then press[ENTER/MEMO]or[p].3Use[ui]to select “FM AUTO PRESET”, thenpress[ENTER/MEMO]or[p].4Press[ENTER/MEMO]while “PRESET ENTER” isflashing.Broadcast stations are preset automatically.Canceling auto presettingPress[TUNER],2>or[2].Broadcast stations whose antenna signal are weak cannot be presetautomatically. If you wish to preset such stations, tune them inmanually.NOTEWhen FM auto preset is performed, the channel currently registeredas the FM auto preset is deleted, and the newly preset FM broadcaststation is registered to the same number as the deleted channel.Tuner playbackTuning in Broadcast StationsConnect the antenna beforehand (vpage 9).1Press[TUNER]or2>to select the receptionband.FM AUTOFM MONODABzAMzRCD-M38DAB onlyGAbout the displayHWhen “FM AUTO” is selected........“AUTO” is displayed.When “FM MONO” is selected......“MONO” is displayed.When “AM” is selected ..................The reception mode is notdisplayed.2Use[TU –, TU +]to select the reception band.When a station is received, the “TUNED” indication will light.• If the function is set to something other than “TUNER”, press[TUNER]to switch the function to “TUNER”.• The function can also be switched to “TUNER” usingSOURCE.nTo tune automaticallyPress and hold in[TU –, TU +]to tune in stations automatically.• Stations whose signal is weak cannot be tuned in.• In the DAB mode, tuning only moves to receivable stations, soauto tuning is not possible.nTo stop auto tuningPress[TU –, TU +].A humming sound may be heard when using a TV nearby whilereceiving AM programs. If this happens, move the system as far fromthe TV as possible.Button located on both the main unit and the remote controlBUTTONButton only on the main unitButton only on the remote control[BUTTON]Symbols used to indicate buttons in this manual[uiop][ENTER/MEMO][TIME/DISPLAY][NUMBER][CLEAR/DEL][TUNER][MENU][TU –, TU +][CH –, CH +][2]SOURCE[DAB/RDS]2>SOURCE<8/-, +/9>