Denon RCD-M38 Owner's Manual

Also see for RCD-M38: Owner's manual Manual Del Usuario Service manual Owner's manual User manual

ENGLISH18Making the DAB settings1 Press [DAB/RDS] during DAB reception.2 Use [ui] to select “item”, then press [ENTER/MEMO].[Selectable items]Tuning Aid :The reception sensitivity of the currently tuned in frequency isdisplayed.• The program can be received without noise when the cursor moveto the right of the sensitivity display.Station Order :The service list is created with the auto scan function.MULTIPLEX ALPHANUMERIC(In order of frequency) (In alphabetical order)DRC (Dynamic Range Control) :11/2OffDAB Version :The DAB module’s version is displayed.DAB initializeWhen the “DAB Initialize” procedure is performed, all the presetmemory settings for the stations and DABs are reset.1 Press [MENU] during DAB reception.2 Use [ui] to select “TUNER SETUP”, then pressthe [ENTER/MEMO] or [p].3 Use [ui] to select “DAB INITIALIZE”, then pressthe [ENTER/MEMO] or [p].4 Press [ENTER/MEMO].• Once initialization is completed, auto scanning is performedautomatically.Listening to DAB/DAB+ (For RCD-M38DAB only)Switching the reception information for thecurrently tuned in DAB station1 Perform steps 1 to 2 under “Tuning in DAB stations”to tune in a DAB station.2 Press [TIME/DISPLAY].• The display switches as shown below each time the buttonis pressed.q Dynamic Label Segment :Text data included in the broadcast is scrolled.w Station Name :The service station name is displayed.e Program Type :The category of the tuned in station is displayed.r Ensemble Name :The ensemble name is displayed.t Frequency:The frequency is displayed.y Signal Quality :The reception signal sensitivity is displayed (0 to 100).• If the reception signal sensitivity is 80 or greater, theprogram can be received without noise.u Audio Information :The mode of the currently tuned in station and its bit rateare displayed.i Date and Time :The current date and time are displayed.• When [MENU] is pressed, the set’s internal clock isupdated to the currently displayed time.[ui p][DAB/RDS][MENU] [ENTER/MEMO][TIME/DISPLAY]Button located on both the main unit and the remote controlBUTTONButton only on the main unit