ENGLISH2Main featuresHigh quality amplifier stressing sound qualityEquipped with a 30 W + 30 W (6 Ω) high-quality amplifier circuits.Direct Play for iPod® and iPhone® via USBMusic data from an iPod can be played back if you connect theUSB cable supplied with the iPod via the USB port of this unit, andalso an iPod can be controlled with the remote control for this unit.Weight and Dramatic soundThe board and circuit configuration has been redesigned to achievelower impedance. Since stable current is supplied to the poweramp and other sections, it is possible to realize as much as 30watts of power.“Simple & Straight” circuit design for soundpurity and free of colorationDENON’s popular M series gives you high sound quality based onthe “simple & straight” concept. Circuitry is uncomplicated, signalpaths are short, and all adverse influences on sound quality havebeen minimized.Playback of MP3 and WMA filesSupports playback of discs and USB memory devices on whichMP3 or WMA files are recorded. The unit’s display can display thetitle of the track and the name of the artist of the current track.Usable characters “Switching the display” (vpage 18, 20)Low standby power consumptionDesigned with the environment in mind, the unit consumes just0.3W while in standby mode.Cautions on handling• Before turning the power switch onCheck once again that all connections are correct and that there areno problems with the connection cables.• Power is supplied to some of the circuitry even when the unit isset to the standby mode. When going on vacation or leaving homefor long periods of time, be sure to unplug the power cord from thepower outlet.• Proper ventilationIf the unit is left in a room full of smoke from cigarettes, etc., forlong periods of time, the surface of the optical pickup may get dirty,preventing it from receiving signals properly.• About condensationIf there is a major difference in temperature between the inside ofthe unit and its surroundings, condensation may form on parts insidethe unit, causing it to fail to operate properly.If this happens, let the unit sit for an hour or two with the powerturned off and wait until there is little difference in temperaturebefore using the unit.• Cautions on using mobile phonesUsing a mobile phone near this unit may result in noise. If thatoccurs, move the mobile phone away from this unit when it is in use.• Moving the unitTurn off the power and unplug the power cord from the power outlet.Next, disconnect the cables connected to other system units beforemoving the unit.About this manualn Operation buttonsThe operations described in this manual are based mainly onremote control operation.n Symbolsv This symbol indicates a reference page on whichrelated information is described.This symbol indicates a supplementary informationand tips for operations.NOTE This symbol indicates points to remember operationsor function limitations.n IllustrationsNote that the illustrations in these instructions are for explanationpurposes and may differ from the actual unit.Thank you for purchasing this DENON product. To ensure properoperation, please read this owner’s manual carefully before using theproduct.After reading the manual, be sure to keep it for future reference.AccessoriesCheck that the following parts are supplied with the product.q er tq Remote control (RC-1127) ....................................................... 1w R03/AAA batteries ................................................................... 2e Power cord (Cord length: Approx. 6.6 ft / 2 m) ....................... 1r AM loop antenna ..................................................................... 1t FM indoor antenna .................................................................. 1y Owner’s manual ...................................................................... 1u Warranty (for North America model only) ................................ 1i Service network list ................................................................. 1Getting started