ENGLISH RemoteControlPlayback(Advanced)ConnectionsSimpleVersionPlayback(Basic)Multi-zone GUISettingsGettingStarted Connections TroubleshootingOtherInformation Spec. IndexPartNamesConnecting an HDMI-Compatible DeviceRequired Settings for HDMI ConnectionSettings can only be made when the input source is “BD/SD”.Set as necessary. For details, see the respective reference pages.Make the Video Output Signal Setting for the Connected Television“Video Setup” (vpage 44)About HDMI Video Resolution SettingChange the HDMI video resolution by pressing RESOLUTION. Switch the outputmode as follows. (Default settings are underlined.)n• RearAuto 480/576i1080P 1080i480/576PSource Direct(480/576 interlaced) (480/576 progressive)(1080 interlaced)(1080 progressive)If the HDMI resolution is not set to “Auto”, set it to correspond with the resolution of yourtelevision.NOTEWhen ZONE2 is powered on, the HDMI video resolution in the MAIN ZONE switches automaticallyaccording to the input signal. When this happens, it is not possible to switch to a different video resolution,even by pressing RESOLUTION. (See page 41 for information on ZONE2).n•Connecting a TVYou can listen to TV audio only.Select the terminal to use and connect the device.For instructions on HDMI connections, see “Connecting an HDMI-Compatible Device” on page 12.This connection is not required when a TV compatible with the ARC function (Audio Return Channel(HDMI1.4 standard function)) is connected to this unit via an HDMI connection.For details, see “About ARC (Audio Return Channel) Function” (vpage 12) or refer to the instructionmanual for your TV.Cables Used for ConnectionsAudio cables (sold separately)Audio cable (White)(Red) RLRLCoaxial digital cable (Orange)Optical cableRLRL3-065"6%*0065015*$"-"6%*0$0"9*"-065TVWhen using a coaxial digital cable for the digital audio connection, set “Manual Setup” – “Audio Setup”– “COAX Input Assign” on the GUI menu (vpage 56) to “AUX2”.•••n