Denon S-5BD Owner's Manual

Also see for S-5BD: Product sheet Code List Service manual

Contents

ENGLISH RemoteControlPlayback(Advanced)ConnectionsSimpleVersionPlayback(Basic)Multi-zone GUISettingsGettingStartedPlayback(Basic) TroubleshootingOtherInformation Spec. IndexPartNamesPresetting Radio Stations (Manual Preset)Your favorite broadcast stations can be preset so that you can tunethem in easily. Up to 56 stations can be preset. Multicasts can alsobe preset.Stations can be preset automatically at “Auto Preset” (vpage48). If “Auto Preset” is performed after performing “Manual Preset”,the “Manual Preset” settings will be overwritten.1 Tune in the broadcast station youwant to preset.RearFront2 Press MEMO.3 Press SHIFT to select the block (A toG) in which the channel (1 to 8 pera block) is to be preset, then pressCHANNEL +, – or 1 – 8 to select thepreset number.4 Press MEMO again to complete thesetting.To preset other stations, repeat steps 1to 4.Default SettingsBlock (A – G)andChannel (1 – 8)Default SettingsA1 – A8 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /90.1 MHzB1 – B8 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,90.1 / 90.1 MHzC1 – C8 90.1 MHzD1 – D8 90.1 MHzE1 – E8 90.1 MHzF1 – F8 90.1 MHzG1 – G8 90.1 MHzSpecify a Name for the Preset Broadcast Station(Preset Name) (vpage 48)•nnListening to Preset Stations1 Press SHIFT to select the memoryblock.RearFront2 Press CHANNEL +, – or 1 – 8 toselect the desired preset channel.You can also operate via the main unit. In thiscase, perform the following operations.Press PRESET + or PRESET – to select thepreset radio station.Direct Frequency TuningYou can enter the receiving frequency directly to tune in.1 Press SEARCH. Rear2 Input frequencies using 0 – 9.If o is pressed, the immediately precedinginput is cancelled.•3 When setting is completed, pressENTER.The preset frequency is tuned in.Tuning in Radio StationsListening to FM/AM Broadcasts1 Press TUNER to select “FM” or“AM”.FrontFMAMWhen listening to an FM broadcast.When listening to an AM broadcast.2 Tune in the desired broadcaststation.q To tune in automatically (Auto Tuning)Press MODE to light the “AUTO” indicatoron the display, then use TU d or TU f toselect the station you want to hear.To cancel Auto tuning, press TU d orTU f.w To tune in manually (Manual Tuning)Press MODE to turn off the display’s“AUTO” indicator, then use TU d or TU fto select the station you want to hear.•Adjusting the Master Volume (vpage 28)Press VOL df.If the desired station cannot be tuned in with auto tuning, tune it inmanually.When tuning in stations manually, press and hold TU d or TU f tochange frequencies continuously.n••