99Barcode Handy Terminal Connector Communication Testplug) as s2. elect “2: CONNECTOR” at the TEST COMMUNICATION menund then press the ENT key.he TEST COMMUNICATION screen displays as shown on the right.If an error occurs, the BHT beeps three times and displays the screen onthehe meanings of the error codes in parentheses are as follows.m the sent data.2: A timeout has occurred during standby for datae C key to return to the TEST COMMUNICATION menu.pon normal completion of the test, the BHT beeps once and displays thecreen on the right.ress the C key to return to the TEST COMMUNICATION menu.1. Wire the cable with JC-25-P-3 (2.5mm stereo mini- hown below and connect to theBHT connector communication port.SaTright.T( X X )1: The received data is different froreception.1: 300 bps2: 115200 bpsPress thUsP
