120BHT-604BW8. Press the C key to return to the SET RF PARAMETER menu.n WEP key, and therefore the WEP kebe stored in a safe location. When not setting a WEP key,previous setting.- Point - It is not possible to read a writte y setting must alwaysthe WEP key will be the same astheIf an attempt is made to save an incorrect encryption key, and error willoccur, and the screen displays as shown on the right.a correct encryption key.Incorrect Encryption Key Examples he encryption key length is incorrect.ired number of encryption keys9. to highlight [6:TRANSMIT KEY], and then press the ENT key.10Reset withT Characters other than hexadecimal notation (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,B, C, D, E, F) are used.Repeat the above procedure to set the requfor WEP KEY 1 to 4.Following that, set the transmit key.Use the cursor keys ([▲] [▼]) or numerical key ([6])The screen displays as shown on the right.. Use the cursor keys ([◄] [►]) to highlight the key number to beused.- Point - Select a key number for which an encryption key has beenset.11. Press the ENT key or C key to return to the SET RF PARAMETERmenu.
