116BHT-604BW Wireless Network Parameter Settings1. Kmenu and then press the ENT key.: SSID]: Displays the current Service Set ID.C s Communication” forr ce2. key.he mode changes to entry mode and the cursor displays.y to enter the Service Set ID.Press the SF and the BS key to change the entry mode (numerical entry (no guidance display) andcharacter, press the BS key.4. d press the ENT key.5. o re .he current settings.2. ys [▲ ▼ t.3. e.4. Press the ENT key or C key to return to the SET RF NETWORK menu.Refer to “Chapter 5 Communication” – “5.3 Wireless Communication” for details of the above settingitems.Select “1: NETWORK PARAMETER” at the SET RF NETWORThe screen displays as shown on the right.[1Refer to “Chapter 5 ommunication” – “5.3 Wirelesdetails on the Se vi Set ID.Ensure that [1: SSID] is highlighted and press the ENTT3. Use the numerical keys and dot kealphabet entry).To delete a singlePress the C key to delete all entries made.Enter the Service Set ID anThe entered Service Set ID is set.Press the C key t turn to the SET RF NETWORK screenWireless Network Option Settings1. Select “2: RF OPTION” at the SET RF NETWORK menu and thenpress the ENT key.The screen displays as shown on the right.The highlighted settings are t[1: POWER SAVE]: Sets power saving mode.[2: RADIO MODE]: Sets the wireless mode.Use the cursor ke ( ] [ ]) or numerical keys ([1] [2]) to highlighthe item to be setUse the cursor keys ([◄] [►]) to highlight each setting valu
