2BHT-604BW1.1 1System ConfigurationThis section describes the hardware required for the barcode data collection system used by the BHT and the BHTsoftware.1.1.1 Hardware ConfigurationIn addition to the BHT, the following hardware and software are required for the barcode data collectionsystem used by the BHT.Please note that certain components of the required hardware will differ depending on the type ofcommunication used. Host computer CU-600 Series (option): Communication unit Connection cable (option): Used to connect the BHT and host computer. Wireless LAN access point (option) Software: BHT-BASIC 4.0 Development Pack (Option) and BHT-BASIC 4.0 Transfer Utility (Option)Host computerBHTWireless LAN access point(option)CU(option)(1) Connectorcommunication(3) Wirelesscommunication*(2) IrDAcommunicationBHT-BASIC 4.0Development Pack(Option)BHT-BASIC 4.0Transfer Utility(Option)● : Required for system configurationHost computer BHT CU Wireless LANaccess point Software Ref. Page(1)Connectorcommunication ● ● — — ● Page 34(2) IrDAcommunication ● ● ● — ● Page 35(3) Wirelesscommunication ● ● — ● ● Page 36