88BHT-825Q series “2:2D CODE”：2D CodeSelect “2:2D CODE” and press ENT key at SET READ CODE to display SET 2DCODE screen, allowing the code to be set to enable/disable. The highlightedsettings are the current settings.To change the settings, use the cursor keys ([▲] [▼]) or numerical keys（[1][2][3][4][5][6]）to select the item to be set and then select the setting valueusing the cursor keys ([◄] [►]).“1：QRCODE”：Enable/disable QR Code.“2：iQRCODE”：Enable/disable iQR Code.“3：DATAMATRIX”：Enable/disasble Data Matrix.“4：PDF417”：Enable/disable PDF417.“5：MAXICODE”：Enable/disable MaxiCode.“6：COMPOSITE”：Enable/disable COMPOSITE.Press ENT key for the detailed settings of the 2D code being selected. Refer to the following section forthe details. Press the BS/C key for the settings value to be valid and then return to the SET READCODE screen.- Point - “1：QRCODE”, ”Q2：iQRCODE”, “Q3：DATAMATRIX”, “Q4：PDF417Q” have different typesof code readings, which allows code readings to be set enable /disable at the detailedsettings according to the type of code readings. If enable, both this setting and the detailedsettings need to be Enabled.- Point - No detailed settings for ”5:MAXICODE” and ”6:COMPOSITE”.
