202BHT-825Q series EAP TYPEThis is the EAP authentication method setting used for 802.1x authentication.Select PEAP or EAP-TLS.This is valid only when the Security mode is 1x Supplicant, WPA-1x or WPA2-1x. IDENTITYThis is the user ID used for 802.1x authentication.A format that includes the domain name (\) may be specified for the identity.An identity, including the domain name, may be specified up to 32 bytes. The domain name may beomitted. PASSWORDThis is the password used for 802.1x authentication.This is valid only when the EAP TYPE is PEAP. ROOT CERTIFICATEThis setting is for the filename of the root certificate used for 802.1x authentication. CLIENT CERTIFICATEThis setting is for the filename of the client certificate used for EAP-TLS authentication. ANONYMOUS IDENTITYThis is the setting for the ID transmitted by EAP Request (ID) packet when performing PEAPauthentication. WPA CIPHERThis is the setting for the encryption method used when specifying WPA.Select TKIP or AES. PRE SHARED KEYThis is the setting for the key used for WPA-PSK or WPA2-PSK.Always set when the Security mode is WPA-PSK or WPA2-PSK.
