Denso BHT-825QW User Manual

Contents

692D Code Handy Terminal[2] Setting the message version, system status indication and screen display compatible modeUse the following procedure to set the display language, system status indication and screen displaycompatible mode.1. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4]) tohighlight ”1: MESSAGE”, ”2: STATUS”, “3: BOOT LOGO”, or “LOGODISPLAY TIME”.2. Highlight the target setting with the cursor keys ([◄] [►]) and pressthe ENT key.Press the BS/C key to return to the SET SYSTEM menu.“1: MESSAGE”:Sets whether messages displayed at the screen are displayed in Englishor Japanese.The default is the message version selected at the system initializing process.The English and Japanese display changes at the following messages.• System error messages• Indications relating to the LCD contrast• Speaker volume• Switching between speaker and vibrator• Battery voltage level screens“2: STATUS”:Sets whether to display or hide the system status displayed at the bottom of the screen.Refer to “System Status Indication” on the following page for details of the system status indication.• “ON”: The system status is displayed.• “OFF”: The system status is hidden.“3: BOOT LOGO”:Selects the logo displayed at startup.The JPG file for the logo is downloaded, and then this menu is used to display the selected JPG fileupon startup.“4: LOGO DISPLAY TIME”:Sets the minimum time the selected logo is displayed.• The time can be set between 9 and 100 (x 100 ms).• When a number between 0 and 9 (x 100 ms) is set, the value is treated as a “9”.• The display time varies according to the logo file size.- Note - The system status indication can be turned ON or OFF using the OUT statement in userprograms. Refer to the “BHT-BASIC Programmer’s Manual.”