218BHT-825Q seriesMessage BHT Response Cause CountermeasureIf this error occurs, thewarning tone beeps fivetimes.During execution ofSystem Program, theSystem Program hasreceived an invalidcommand code.(xxxxxxxx: Error address)Unload and reload thebattery cartridge, then turnthe BHT on.If this error occursfrequently, make a note ofthe displayed message andcodes and contact yoursystem administrator.The message continues todisplay.When the BHT is turnedon, no user programs arefound.Contact your systemadministrator.You can run the codescanning demo without userprograms.Pressing “1:Yes” runs thecode scanning demo.Press the trigger switch tostart the code scanningdemo. Selecting “2:No” turnsthe power off.If this error occurs, thewarning tone beeps fivetimes and then turns itselfoff.Any of the hardwareerror, memory error,execution program error,etc. has occurred.(XXXX: Error code)Turn the BHT on again. Ifthis error occurs frequently,make a note of the displayedcode and contact yoursystem administrator.The BHT displays this errormessage and automaticallyruns the execution programfrom the point of start-up.Operation was terminatedwithout turning OFF thepower normally with theresume function set, andtherefore resume info hasbeen lost.If this error occursfrequently, make a note ofthe displayed code andcontact your systemadministrator.
