Denso WAVE BHT-805BWB User Manual

Contents

110BHT-805BWB “2: SET PING” (PING Options Setting Screen)1. Select “2: SET PING” at the TEST PING menu and then press theENT key.The current settings are displayed.[1: DESTINATION IP]:Specifies the IP address of the host computer to be pinged.[2:DATA SIZE]:Specifies the data size of the echo request.[3:INTERVAL]:Specifies the echo request interval (in units of 100 ms).[4:TIMEOUT]:Specifies the timeout period (in units of 100 ms) for the echo request.[5:COUNT]:Specifies the number of echo requests to be sent.[6:SEND TYPE]:Selects the echo request send timing (TYPE 1 or TYPE 2).(Refer to “PING Echo Request Transmission Timing (SEND TYPE)” on the following page for details.)2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5] [6]) to highlight the item to beset, and then press the ENT key.The mode changes to entry mode and the cursor displays.Use the cursor keys ([◄] [►]) to highlight the “6: SEND TYPE” setting.3. Enter the setting values with the numerical keys and dot key.To delete a single character, press the BS/C key. To delete the entire entry,press and hold the BS/C key, or press the SF key and BS/C key simultaneously.4. Enter the setting values and then press the ENT key.Press the BS/C key to return to the TEST PING menu.Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNTItem Allowable Entry range DefaultDATA SIZE 4 to 1472 56INTERVAL 0 to 65535 10TIMEOUT 0 to 65535 10COUNT 0 * to 65535 4* Specifying zero (0) will set the number of echo requests to “infinite,” meaning that echo requests will besent continuously until the PING test is aborted.If a value outside the allowable entry range listed above is specified, the nearest value within the rangewill automatically be applied.