143Barcode Handy Terminal Setting up the master station1. Select “3: MASTER” in the SET BLUETOOTH menu and thenpress the ENT key.The current settings are displayed.[1: PEER BD_ADDR]: Sets up the remote device address of theconnection target.[2: PASSKEY]: Sets up the Bluetooth ® passkey for the masterstation[3: TIMEOUT]: Sets up the timeout period in seconds.[4: SECURITY]: Sets up the security mode for the master station.Press the Backspace/clear key to return to the SET BLUETOOTH menu.2. Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3] [4]) to select the menu and then pressthe ENT key.Entry mode is activated and the cursor is displayed.To set up the “4: SECURITY”, use the cursor keys ([◄] [►]) to highlight and set the desired setting.3. Use the numeric and period (.) keys to enter the desired value.“PEER BD ADDR”; 12-digit hexadecimal numbers onlyThe ENT key is not available until the twelfth digit is entered.“PASSKEY”: Up to 16 characters“TIMEOUT”; Valid Range: 1–255, Default: 30 secondsFor the Bluetooth ® passkey and the security mode details, refer to “Chapter 5 Communication” – “5.3Bluetooth ® wireless communications”.To switch the entry mode (between numeric and alphabet entries), press the SF key.To delete a single character, press the Backspace/clear key. To delete the entire entry, press and holdthe Backspace/clear key or press the SF and Backspace/clear keys simultaneously.4. Press the ENT key.5. Press the Backspace/clear key to return the SET BLUETOOTH menu.
