Denso WAVE BHT-805BWB User Manual

Contents

73Barcode Handy Terminal[4] Setting the special barcode scanning parametersUse the following procedure to set the barcode scanning conditions.1. Select “4: BARCODE” at the SET SYSTEM menu and then pressthe ENT key.The SET BARCODE menu screen on the right displays.The highlighted display and displayed values will be the current settings.2. Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5]) tohighlight the item to be set.3. Change settings with the cursor keys ([◄] [►]) and press the ENTkey.Press the BS/C key to return to the SET SYSTEM menu. “1: INVERT”: Black/white inverted label scanning functionEnable or disable black/white inverted label scanning.“ON”: Enables black/white inverted label scanning.“OFF”: Disables black/white inverted label scanning.- Point - By enabling black/white inverted label scanning, it will also be possible to scan black/whiteinverted labels, however, there is higher chance of barcodes being incorrectly scanned.This should normally be set to “OFF” (black/white inverted label scanning disabled). “2: DECODE LEVEL”: Decode levelSet the decode level (barcode scanning tolerance level).Press [ ] to decrease the setting value and [ ] to increase the setting value.Decode level entry range: 1 - 9 (Default: 4)Decreasing the level increases the barcode reading efficiency, however, the BHT may incorrectly scanlow-quality (split or stained) barcodes.On the other hand, increasing the level decreases the barcode reading efficiency, but will decrease thepossibility of incorrect scanning.