Dynex DX-15L150A11 User Manual

Also see for DX-15L150A11: Quick setup guide Firmware update Quick setup guide Guía De Instalación Rápida User manual

16 Adjusting the pictureDX-15L150A11/DX19L150A11/DX-22L150A11• Advanced Contrast—Opens the Advanced Contrastsubmenu. Turn this On to optimize the picture display for amore vivid image. You can also set the Dynamic ContrastRatio to On to automatically adjust the contrast betweenthe light and dark areas of the picture.4 Press MENU to return to the previous menu, or press EXIT toclose the menu.Adjusting the computer imageNote: These settings are only available when the input source is VGA andyour TV is receiving a computer signal.To adjust the computer image:1 Make sure that your TV is in VGA mode. For more information, see“Selecting the video input source” on page 13.2 Press MENU. The on-screen menu opens.3 Press or to highlight SETTINGS. The SETTINGS menu opens.4 Press or to highlight Computer Settings, then pressENTER. The Computer settings menu opens.5 Press or to highlight an option, then press or to adjustthe option. You can adjust:• Auto Adjust—Automatically adjusts the image settingssuch as position and phase• H-Position—Moves the image right or left• V-Position—Moves the image up or down• Clock—Adjusts the sample frequency• Phase—Adjusts the focus of stable images• Reset Computer Settings—Resets the computer settingsto factory default.6 Press MENU to return to the previous menu, or press EXIT toclose the menu.Setting the component imageNote: These settings are only available when the input source isComponent and your TV is receiving a signal.To set the component image:1 Press MENU. The on-screen menu opens.2 Press or to highlight SETTINGS. The SETTINGS menu opens.3 Press or to highlight Component Settings, then pressENTER. The Component Settings menu opens.4 Press or to highlight an option, then press or to adjustthe option. You can adjust:• Phase—To minimize horizontal distortion (0~100)• Reset Component Settings—Resets the componentsettings to factory default.5 Press MENU to return to the previous menu, or press EXIT toclose the menu.