8 Making connectionsDX-19LD150A11/DX-22LD150A11Notes:Do not expose the remote control to shock or liquids.Do not use the remote control in an area with high humidity.Do not place the remote control in direct sunlight.Do not place objects, such as furniture, between the remote control andthe remote sensor.The remote control may not work if direct sunlight or bright light shines onthe remote sensor. Either move your TV/DVD combo or change theangle at which you use the remote control.Programming a universal remote controlYou can operate your TV/DVD combo with a new or existing universalremote control.To program your existing universal remote control:1 To program your existing remote control to work with your DynexTV/DVD combo, see the table below for common codes. If youhave problems programming your remote, or need a differentremote control code, visit www.dynexproducts.com for the latestremote control code information.Codes for other remote controls are available online at:http://www.dynexproducts.comTips:• The brand name is often visible on the front of the universal remotecontrol, and the model number is often visible on the back.• The codes shown above are common codes, but are subject to change.Please refer to Dynexproducts.com for the most up to date codes.• If your universal remote control isn’t listed on the chart, refer to youruniversal remote control’s instructions and try codes for the brandsOrion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may needto try several codes before finding a match.2 Follow your universal remote control’s instructions to enter thecode you found in Step 1.Tips:• If your universal remote control has a code search feature, run a codesearch to identify a code that matches your TV/DVD combo. See youruniversal remote control’s instructions for details.• If your universal remote control has a “Learn” feature, you canmanually program it using your TV/DVD combo remote to “teach”the commands one at a time. See your universal remote control’sinstructions for details.3 If all else fails, you must use a different universal remote controlthat can operate both your set-top box and your TV/DVD combo.Five such remotes are listed on the chart, but many othercompatible models are available in the market.For more help, call technical support for your universal remotecontrol or set-top box manufacturer, or call the Dynex CustomerCare Center:US & Canada Market- 1-800-305-2204Mexico Market- 01 800 - 926 - 3020Making connectionsBefore you make any connections:• Check the plugs on the ends of cables to make sure that they arethe correct type before you try plugging them into jacks on theTV/DVD combo.• Make sure that all plugs are securely inserted into the jacks.Loose connections can result in image or color problems.• When connecting devices to the TV/DVD combo, make sure thatthe TV/DVD combo and the device are turned off and that thepower cords are unplugged.Selecting a locationYou should select a location for the TV/DVD combo:• Where direct light does not reflect on the screen• That has indirect and soft lighting• Where the TV/DVD combo has access to an antenna or cable TVconnection• Where the TV/DVD combo has access to a power outletNote: Watching TV in total darkness or with a reflection on the screenmay cause eye strain.Connecting the powerTo connect the power:• Plug the AC cord into the AC IN jack on the back of your TV/DVDcombo, then plug the other end into an AC power outlet.Notes:• The AC plug on the TV/DVD combo may be different from the oneshown.• Make sure that you only use the type of power source indicated on themarking label.• Always unplug the power cord when not using the TV/DVD combo fora long period of time.Dynex TV codes for universal remote controls(for all Dynex TVs manufactured after Jan. 1, 2007)Universal remote control manufacturer and modelPhilipsPHDVD5,PH5DSS,PMDVR8,PDVR8RCARCU807One for AllURC-6690SonyRM-VL600115 135 0464 8043Set-top box manufacturer and modelComcastM1057DishNetworkVIP508,VIP622MotorolaDRC800TIVOSeries 3, HDDirectTVRC230463 720 0463 0091 10463