Dynex DX-22LD150A11 User Manual

Also see for DX-19LD150A11: Important information Quick setup guide User guide Guía De Instalación Rápida Guía del usuario

Contents

16 Adjusting the soundDX-19LD150A11/DX-22LD150A11Adjusting the soundTo adjust the sound:1 Press MENU. The on-screen menu opens with the Picture menudisplayed.2 Press or to highlight Audio. The Audio menu opens.3 Press or to highlight an option, then press or to adjustthe option. You can select:• Mode—Selects the EQ sound mode. You can selectStandard, Music, Theater, News, or Custom.• Treble—Adjusts the high sounds.• Bass—Adjusts the low sounds.• Balance—Adjusts the balance between the left and rightaudio channels.• Auto Volume—Turns auto volume on or off.• Advanced Audio—Opens the Advanced Audio submenu.Press or to select an option, then press or to setthe option: you can select:• Digital Audio / SPDIF—Select the preferred audioformat for digital audio signals. Options include PCMand RAW.• Audio Language—Select the default language trackwhen watching digital TV programs. Options includeEnglish, Français, and Español.• MTS / SAP—Select the default language stream whenwatching analog or digital TV channels. See “Selectingthe audio language” on page 15.Note: You can also choose the audio mode with the remote control. PressAUDIO repeatedly to cycle through the preset EQ modes. A popupscreen indicates the current EQ mode.When you adjust the treble, bass, and balance settings in the Audio menu,the audio mode is automatically set to Custom.4 Press MENU to close the on-screen menu.Playing TV audio onlyYou can turn off the picture on your TV/DVD combo and only listen tothe program audio.To play TV audio only:1 Press MENU. The on-screen menu opens with the Picture menudisplayed.2 Press or to highlight Channel. The Channel menu opens.3 Press or to highlight Audio Only, then press or toselect On.4 Press MENU to close the on-screen menu.Notes:• After Audio Only is set to On, the TV picture will disappear 10seconds after the on-screen menu is closed.• Audio Only works only when the input source is TV and your TV/DVDcombo is receiving a broadcast signal.• To exit Audio Only mode, press any button except the power button.When you exit Audio Only mode, the Audio Only option isautomatically reset to Off.