Dynex DX-22LD150A11 User Manual

Also see for DX-19LD150A11: Important information Quick setup guide User guide Guía De Instalación Rápida Guía del usuario

Contents

Adjusting the sound 15DX-19LD150A11/DX-22LD150A11Adjusting the computer imageTo adjust the computer image:1 Make sure that your TV/DVD combo is in VGA mode. For moreinformation, see “Selecting the video input source“on page 12.2 Press MENU. The on-screen menu opens with the Picture menudisplayed.3 Press or to highlight Settings, then press . The Settingsmenu opens.4 Press or to highlight VGA Settings, then press ENTER or. The VGA Settings submenu opens.5 Press or to highlight an option, then press or to adjustthe option. You can adjust:• Auto Adjust—Automatically adjusts the image settingssuch as position and phase.• H-Position—Moves the image right or left• V-Position—Moves the image up or down• Clock—Adjusts the sample frequency• Phase—Adjusts the focus to stabilize the image6 Press MENU to close the on-screen menu.Changing the PC video resolutionTo change the PC video resolution:1 Click Start, Control Panel, then double-click Display. TheDisplay Properties dialog box opens.2 Click the Settings tab.3 Change the screen resolution setting to a supported resolution.The ideal resolution for your TV/DVD combo is 1360×768. ClickOK, then click Yes to save your changes.PC signal input chartThe following table shows the suggested screen resolutions.If “Unsupported Signal” appears on the screen, adjust the PC displaysetting to correspond to one of the settings in the preceding table.Adjusting the soundSelecting the audio languageYou can choose from one of the four preset equalizer (EQ) modes.To choose an audio language with the remote control:• Using the remote control, press SAP repeatedly to cycle throughthe audio stream options. The options available depend on yourTV provider.• In analog TV mode, select one of the following options.• Mono—Select this option if there is noise or static froma weak broadcast signal.• Stereo—Select this option for programs broadcast instereo sound.• SAP—Select this option to enable audio in analternative language.• In digital TV mode, select the preferred audio track language(when available).Format Resolution Frequency(Hz)VGA 640x480720x4006070SVGA 800x600800x6006072XGA 1024x768 60WXGA 1280x7681360x7686060