Dynex DX-22LD150A11 User Manual

Also see for DX-19LD150A11: Important information Quick setup guide User guide Guía De Instalación Rápida Guía del usuario

Contents

10 Making connectionsDX-19LD150A11/DX-22LD150A11To connect an antenna, cable TV, or satellite TV box:1 Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLEIN jack on the back of the TV/DVD combo, then connect the otherend of the cable to the antenna or cable TV wall jack.2 Turn on your TV/DVD combo.3 Press INPUT on the remote control or the side of your TV/DVDcombo to display the input source menu.4 Press INPUT repeatedly or press or to select TV, then pressENTER.Caution:The antenna connector should only be finger-tightened. Do not tightenthis connector with any tool or you may damage your TV/DVD comboNotes:Use a 75 ohm cable to eliminate interference and noise from radio waves.Do not bundle the 75 ohm cable with the power cord or other cables.If the antenna is not installed correctly, contact qualified service personnelto correct the problem.Connecting a VCR or standard videodeviceNote: If the VCR has an HDMI jack (best), component jacks (better), or anS-Video jack (good), connect the VCR using the best availableconnection.To connect a VCR or standard video device:1 Make sure that your TV/DVD combo’s power cord is unpluggedand the VCR is turned off.2 Connect an AV cable to the AV OUTPUT jacks on the VCR.3 Connect the other end of the cable to the VIDEO IN (AV and L/Raudio) jacks on the back of your TV/DVD combo.To play from the VCR:1 Turn on your TV/DVD combo, then press INPUT. The Source Listmenu opens.2 Press INPUT repeatedly or press or to select AV, then pressENTER.3 Turn on the VCR or standard video device, insert media, thenpress PLAY.Connecting a computerTip: Some computers have an HDMI connector, which can be used for abetter picture.To connect a computer:1 Make sure that your TV/DVD combo’s power cord is unpluggedand the computer is turned off.2 Connect a VGA cable to the VGA jack on the computer, thenconnect the other end of the cable to the VGA jack on the back ofyour TV/DVD combo.Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable.PC/DVIAUDIO INPBPRPC/DVIAUDIO INPBPRBack of TVAV cableNote: Cables are oftencolor-coded to connectors.Connect yellow to yellow,red to red, and white towhite.PC/DVIAUDIO INPBPRAudio cable (stereomini plugs)D-Sub cable(analog RGB)Back of TVComputer