Eaton 9E Installation And Operation Manual

Also see for 93E: User and installation guide Operation manual Installation and operation manual Installation and operation manual Instructions

Contents

UPS Operating InstructionsEaton 9E UPS (80-200 kVA, 380/400/415V) Installation and Operation Manual 6-5Figure 6-4. Parts of the LCD6.2.3 Using the LCD and PushbuttonsThe LCD on the control panel provides an operator interface with the UPS system. Figure 6-4 identifies thedisplay areas discussed in the following sections.The UPS status area automatically scrolls between the Eaton model number, current date and time, activealarms, UPS status, load percent, and battery runtime for the UPS. The top line of display blinks whilescrolling when the system needs attention. Some notices and alarms may be accompanied by an audiblehorn. To silence the horn, press any control panel pushbutton once. Shown is a typical alarm message. Formore information about alarms and notices, see paragraph 6.2.2.The information area contains data about UPS status and operations.The menu bar shows the symbols of the available screens. To select a screen, highlight the screen symbolusing the navigation pushbuttons and then press the RETURN pushbutton.The navigation pushbuttons function depending on the screen displayed. Use the Up, Down, Left, andRight pushbuttons to scroll through available screens and the Esc and Enter pushbuttons to select menuscreens and functions.You can use the LCD and the pushbuttons to:• Look at a log of UPS events (alarms, notices, and commands) (see paragraph 6.2.6)• Monitor UPS operation (see paragraph 6.2.6)• Set UPS parameters (see paragraph 6.2.6)• Control UPS operation (see paragraphs 6.2.6 and 6.2.7)After approximately 10 minutes, the display screen darkens. To restore the screen, press any pushbutton once.ABCDAlarm:Alarm:Alarm:Alarm: OutputOutputOutputOutput ACACACAC UnderUnderUnderUnder VoltageVoltageVoltageVoltageABCDMeter Events History Controls Setup