Eaton BiWire Flexi EFBW8ZONE-FLEXI Installation Manual

Auxiliary OutputThe Auxiliary Output is a 30V DC output provided at thepanel to power ancillary equipment. The current consumedby this output must be considered when calculating batterystandby times. The contacts are not monitored.Class ChangeThe sounders can be operated by an external volt freecontact. A short circuit at this terminal will activate non-latching sounders (no indication will show on the fire alarmpanel). The sounders will automatically silence when theshort circuit is removed. This is sometimes used for schoolsat class change times.NO VOLTAGE SHOULD BE APPLIED TO THIS INPUT2.8 Control Panel Inputs and OutputsFigure 7: Panel Wiring DiagramFigure 8: Auxiliary Output TerminalFigure 9: Class Change Input TerminalWARNINGThe BiWire Flexi Fire Detection & Alarm Systemwww.acornfiresecurity.comwww.acornfiresecurity.com