Eaton BreakerVisu NZM-XMC-MDISP35-MOD Manual

Also see for BreakerVisu NZM-XMC-MDISP35-MOD: Manual Instruction leaflet Instruction leaflet Instruction leaflet

2 Operator interface2.3 “Start” window12 BreakerVisu 06/16 MN01210001Z-EN www.eaton.com2.2.2 3.5“ variantThe main menu in the 3.5“ BreakerVisu variant only has one button foraccessing the device overview. The reason for this is that the 3.5“ variantcomes with either a Modbus RTU or a SmartWire-DT communicationinterface, meaning that it is not necessary to distinguish between networkswhen accessing the overview. This BreakerVisu variant allows for up to eightdevices to be configured. Also, please note that the main menu will notappear in the device details screen in the 3.5“ variant.Figure 3: Main menu (3.5“ variant)Table 5: Main menu controls (3.5“ variant)2.3 “Start” windowThe home screen shows the date and time and provides an overview of theBreakerVisu system in terms of connected devices, warnings, measurementsettings, and when measurements start. In both BreakerVisu size variants,this screen includes not only the main menu, but also buttons that can beused to access the available languages and an overview of notifications.Control ActionTap the Start button to open the BreakerVisu program‘s home screen.Button used to access the device overview screen.Device overview screens provide basic information regarding the correspondingdevice groups.Button used to access the power monitoring settings and status functions.Button used to access various system settings, the BreakerVisu programconfiguration, the user management functions, and the licensing functions.