Eaton BreakerVisu NZM-XMC-MDISP35-MOD Manual

Also see for BreakerVisu NZM-XMC-MDISP35-MOD: Manual Instruction leaflet Instruction leaflet Instruction leaflet

2 Operator interface2.7 “Extras” screenBreakerVisu 06/16 MN01210001Z-EN www.eaton.com 37Table 38: Controls – Security settings (3.5“ variant)Table 39: Controls – Console lock (3.5“ variant)Figure 32:“Extras” screen – License other features (3.5“ variant)Control ActionA user password can be used to lock and unlock all ofthe BreakerVisu program‘s configuration functions.The password, which is case-sensitive, can have amaximum of six characters. The default password is123456.Tap the old password field to enter the currentpassword.Then tap the new password field to entera new password.If you enter the old password correctly and the valuesin the New and Re-type fields match, you will be ableto save the new password by tapping the Savebutton.If there is a problem when you try to enter the newpassword, the system will show a description of theproblem in the corresponding fields.Control ActionTap the Panel Lock pane to enter the current userpassword.After you enter the right password, you will be able tolock and unlock all BreakerVisu program configurationfunctions by tapping the Lock or Unlock button asapplicable (the button is the same for both, with thetext changing depending on the system‘s currentstatus). If you enter the wrong password, the buttonwill show a warning. As soon as you enter the rightpassword, the lock will be lifted and the passwordyou entered will be deleted from the field, meaningthat it will have to be entered again before the nextuser action.