Eaton HomeHeartBeat User Manual

Also see for HomeHeartbeat: User guide

Contents

1Join the Sensor to the System and Set OptionsNow, you are ready to join your Open/Closed Sensor to thesystem. When you have completed this step, you will see anew icon for the Open/Closed Sensor on your Home Key screen.Every time you add a sensor to the system, a new icon willappear on your Home Key.@ge]C]qBmklMh\Yl]\CARRY the sensor and Home Key to the location where youwant to place it.If the Home Key is not “awake,” CLICK the thumbwheel onceto wake it and slide the Home Key into the Slide Channel(located on the top of the sensor).Wait a moment for the Home Key to respond to the connection.The screen will show, Device found...okay toremove key.Getting StartedSlidetheHomeKeyintothechannelonthetopofthesensor.TaketheHomeKeyalongwiththesensortothelocationwhereyouwanttoinstallthesensor.